Files
+16 078446694c Add Crowdin, introduce new provider schema, introduce NetherNet blog post (#51)
* Begin testing i18n

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Add crowdin in-context demo for non-mdx

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Add crowdin-sync system

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Working sync system for translations

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Only build en locale for PRs

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Modify yarn install

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Do not immute cache

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Try with standard yarn install

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Revert to yarn --immutable

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Remove explicit url/file-loader resolutions

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Only log webpack errors

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Added MCServerHost to hosting providers (#47)

* Added MCServerHost to hosting providers

* Update providers.ts

* Correct grammar and make instructions more concise

---------

Co-authored-by: Kas-tle <26531652+Kas-tle@users.noreply.github.com>

* Update supported Bedrock versions

* Remove and Replace "TydiumCraft Skin API" (#53)

* Update community-geyser-projects.md

I no longer will run TydiumCraft Skin API. I have no interest in continuing it at this time (or anything minecraft related). However I have switched out the spot with an API that 100% is always updated and active. Hosted by my good friend Bret06. This works so much better as well. Thanks for everything over the years guys! Tydium out!

* Update wiki/other/community-geyser-projects.md

👍

Co-authored-by: chris <github@onechris.mozmail.com>

---------

Co-authored-by: chris <github@onechris.mozmail.com>

* Update wording for creepernation api

Update wording because it’s bothering me

* Update GeyserExtras description  (#52)

* Update community-geyser-projects.md

* Update wiki/other/community-geyser-projects.md

Co-authored-by: chris <github@onechris.mozmail.com>

---------

Co-authored-by: Luke <32024335+lukeeey@users.noreply.github.com>
Co-authored-by: chris <github@onechris.mozmail.com>

* Try matrix build strategy

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Fix matrix output

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Matrix goes to GITHUB_OUTPUT

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Fix deploy needs to combine

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Ensure correct commit is used if crowdin updates

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Make sure excluded content is respected

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Allow permission for commit action write

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Sync translations with Crowdin

* Update index.md to make clear that this is for servers, not purely for clients (#57)

* Update providers.ts (#58)

* Update providers.ts

VemoxHost added

* Maintain alphabetized list

---------

Co-authored-by: Kas-tle <26531652+Kas-tle@users.noreply.github.com>

* Start on re-writing the providers page to provide more useful details to improve the setup guide

* more work on this

* Rework paper page for setup

* Don't try and build paper setup as a full page

* adjust not listed message

* update mod/proxy pages

* Initial setup i18n

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Add ability to hide proxy setup instructions by provider

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Temporary auto deployment; fix broken links

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Fix heading consistency

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Update language on provider instructions

* Update language on new provider instructions

* Upgrade actions/setup-node due to hang issue

* Both

* Forgot how many times we setup node...

* Documentation for changes in API/2.6.2 (#62)

* Document latest Geyser changes:
- remote resource packs

* Update/Finish pack docs

* small typo fixes

* Update page content

* fix build

* Update supported Bedrock version

* Add Modrinth Servers to providers (#63)

* Update supported versions & api version

* Update versions.json to include 1.21.72 (#64)

* Update bedrock version (#67)

* Add 'we are not mojang' disclaimer to footer

* Stop translations from overriding footer message

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Fix Standalone dump view (#68)

* Add OrionNodes to providers (#69)

* Update supported Bedrock versions in versions.json (1.21.81, 1.21.82) (#70)

* Update faq.mdx to include recommended API (#73)

Tydium skin API is abandoned, please direct users to a working API such as the one recommended by Tydium

Derived from: https://github.com/GeyserMC/GeyserWebsite/commit/19ae50f95ddbfc24ff34a42d278bdc263e0200e6

* Update anticheat-compatibility.md (#74)

* Update versions.json

* Update versions.json (#75)

* Remove LAC because it is no longer being maintained (#76)

* Update versions.json for 1.21.7 (#77)

* Update versions.json for 1.21.93 (#78)

* Update versions.json for 1.21.94 (#79)

* Update versions.json for Java 1.21.8 (#80)

* Update Geyser Api version (#81)

* Readd Hydraulic and add Rainbow, provide Item API V2 warning for Hydraulic (#82)

* Fix incorrect Ubuntu on Oracle Cloud instructions (#84)

* Remove Geyser Android App and Tempest (#83)

* Update version.json for 1.21.100 (#88)

* Update getting-started-with-the-api.md (#89)

* Add and update wiki pages, add Thunder download. (#90)

* Add a Thunder and Rainbow wiki page, touch up some other pages

* Fix mobile sidebar

* Address review 1/2

* Address review 1.5/2 (oops)

* Address review 2/2

Co-authored-by: chris <github@onechris.mozmail.com>

---------

Co-authored-by: chris <github@onechris.mozmail.com>

* Indicate 1.21.101 on the Geyser Website (#93)

* Added GeyserFloatingPoints to FAQ (#92)

* Added GeyserFloatingPoints.

* Update wiki/geyser/faq.mdx

Co-authored-by: chris <github@onechris.mozmail.com>

---------

Co-authored-by: chris <github@onechris.mozmail.com>

* Update versions.json to indicate support for bedrock 1.21.111

* Update versions.json for Java 1.21.9/1.21.10 (#97)

* Update versions.json for Java 1.21.9

* Update versions.json to include 1.21.10

* Update supported Bedrock version

---------

Co-authored-by: Aurorawr <auroranova8756@gmail.com>
Co-authored-by: chris <github@onechris.mozmail.com>

* Update extensions file for new dependency system (#98)

* Update extensions file for new dependency system

* Update version

* Update wiki/geyser/extensions.md

---------

Co-authored-by: chris <github@onechris.mozmail.com>

* Replace the Crowdin link with the current one (#101)

* Replace the Crowdin link with the current one

* Replace the link with the subdomain redirect

* Update versions.json to include 1.21.114 (#102)

* Update rainbow.md to indicate 1.21.9/.10 (#103)

* Revise port forwarding instructions for Ubuntu

Updated instructions for allowing Minecraft and Geyser through the OS firewall on Ubuntu.

* Update providers and deploy action

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Sync translations with Crowdin

* Correct providers syntax

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Use more templates wherever possible

* Add build cache; update docusaurus-og

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Test deploy time with cache hit

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Use read-only cache for matrix build

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Unlikely we will use gh actions on arm...

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* This time cache will hit

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Hopefully correct yarn cache path...

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Maybe npm?

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Surely...

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* This time...

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Include yarn/docusaurus cache for PRs

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Add page IDs to more pages, fix broken pages

* Update i18n pages

* Sync translations with Crowdin

* Add missing support pages and articles on providers, add Discord links

* Add blog post on preparing Geyser servers for NetherNet

Drafted with the help of Claude Opus 5.5.

* Rewrite the hosted setup guide for NetherNet, add hosting page

Provider entries now describe ports, signaling and install steps, grouped
in the order the setup guide shows them. The guide generates the NetherNet
config from them, and the old supported hosting providers list is replaced
by a hosting page for Open Collaboration supporters.

Drafted with the help of Claude Opus 5.5.

* Rewrite the self-hosted setup guides for NetherNet

The self-hosting pages now use the same steps and generated config as the
hosted guide, and point out that the Geyser port needs both TCP and UDP.

Drafted with the help of Claude Opus 5.5.

* Add HTTPS for NetherNet page

Covers serving built-in signaling over HTTPS, with a certificate in the
Geyser config or with a reverse proxy (Caddy, nginx).

Drafted with the help of Claude Opus 5.5.

* Skip Crowdin sync in deploy workflow when no token is set

Forks do not have the Crowdin secrets, so the sync step failed there and
nothing got deployed. Without a token, the workflow now builds and deploys
the pushed commit as is.

Drafted with the help of Claude Opus 5.5.

* Address: rtm's comments

* Improve layout, drop confusing 26.40 note on setup guide

* Cleanup blog post language / line breaks

* Merge proxy server guides for server hosts, adjust exarotron provider entry, adjust setup guides to work with crowdin

* Split the proxy setup guides back into Velocity and BungeeCord

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Update hosting providers to upstream and collapse strings into defaults

Port upstream's provider changes to the new format: add Minehost and
ConsulHosting, update MCServerHost, rename Feather to Dawn and Modrinth
Servers to Modrinth Hosting, merge RamShard into RackGenius, add MyArena,
and drop hosts upstream removed. Restore link fixes the rewrite undid
and install details dropped from the live page.

Replace host-specific strings with templates or the generated steps
where they say the same thing. Hosts that pick the port themselves show
where it comes from instead of the config step.

Hosts without NetherNet details that shared the Java server's port now
ask for a new port, open for both TCP and UDP, and the generated config
turns clone-remote-port off. Hosts that cannot give out a port fall back
to the "Not listed" guide for the Java server's port, which uses Warden.
BisectHosting no longer uses assumed example data. Entries keep the date
of their last edit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Remove Dawn and date Aternos and exaroton today

Dawn now integrates with Aternos, so it no longer needs its own entry.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Remove unused translation strings and fix the English GeyserConnect text

Drop keys the code no longer uses from every locale: the old EmoteOffhand
description ID, the theme's old unlisted content strings, strings removed
on this branch, and the removed Custom Resource Packs sidebar category.
The English GeyserConnect description had an outdated message that
overrode the current one on the English site.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Hide the NetherNet and RakNet option when only the Java port is available

With only the Java server's port there is no second UDP port for RakNet,
so the "Not listed" Java port guide shows the NetherNet config without
transport tabs. Drop the placeholder text that only applied there.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Add an HTTPS step to the self-hosted guides and correct external signaling HTTPS claims

Self-hosted guides end with a recommended step to serve signaling over
HTTPS, since Geyser's built-in signaling uses plain HTTP by default and
players get a "Trust on First Use?" prompt. External signaling services
do not all provide HTTPS, so the blog post and HTTPS page now name Warden
as one that does instead of implying all do.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Update port forwarding guide, update OVH note

* Sync translations with Crowdin

* Hide entire placeholder strings and correcntly mark chrome json in crowdin

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Update actions and yarn

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Sync translations with Crowdin

* Apply batched suggestions from code review

Co-authored-by: Eclipse <eclipse@eclipseisoffline.xyz>

* Fix NetherNet docs for the final Geyser PR

- Built-in signaling serves HTTPS instead of HTTP once a certificate is configured (blog, system properties)
- "Free port" is now "available port" in the blog
- System properties: drop the removed "none" signaling mode, fix the signaling port default
- playit.gg: note that the guide is for RakNet, and link playit.gg's NetherNet progress

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Build the setup guides from translation strings

The per-platform setup pages are replaced by SetupGuide.tsx, which renders the
hosted and self-hosted guides from shared MDXTranslatable strings, so Crowdin
translates each sentence once instead of every page separately.

Also:
- "Not listed" with only the Java port sets mode: nxs instead of relying on Geyser's fallback
- The playit.gg note links playit.gg's NetherNet progress instead of describing a setup
- "free port" is now "available port"

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Remove the trustedProxies.fetch system property for now

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Fix crowdin sync and don't translate trade names

Signed-off-by: GitHub <noreply@github.com>

* Sync translations with Crowdin

* Fix build

Signed-off-by: GitHub <noreply@github.com>

* Sync translations with Crowdin

* Address more concerns with nethernet https guide

Signed-off-by: GitHub <noreply@github.com>

* Fix signaling-trusted-proxies config in nethernet https article

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>

* Remove port forwarding from the HTTPS guide

Ports are already covered by the setup guide, and HTTPS does not change
which ports need to be opened. Reverse proxies now use
signaling-trusted-proxies, which reads X-Forwarded-For.

* Remove placeholder hosts, hide the hosting page until it launches

- Remove the placeholder hosts and their logos
- Aternos and exaroton are bronze supporters: highlighted with a badge in
  the setup guide, without a "last updated" date, but not listed on the
  hosting page, which only shows gold and silver
- Hide the hosting page and its links for now, and mention in the blog
  post that it is coming soon

* Supporting hosts configure Geyser, they do not install it

* Sync translations with Crowdin

* Move nethernet https guide up on sidebar

* Update to docusaurus 3.10 and fix all type errors

Signed-off-by: GitHub <noreply@github.com>

* HTTP and HTTPS do not both run at once

* Link win-acme's and nginx's own Windows guides in the HTTPS guide

* Fix crowdin key exclusion logic

Signed-off-by: GitHub <noreply@github.com>

* Sync translations with Crowdin

* Address reviews, clear up instructions for users. Adds info on haproxy, NXS and MOTD forwarding

* Note certificate permissions and where to save the Caddyfile

* Sync translations with Crowdin

* Document the geyser nethernet command

* Sync translations with Crowdin

* Support directly linking to the "not listed" or a specific hosts' guide

* Mention warden supporting custom domains

* Add HOSTING_PROVIDERS.md, update existing server host setup entries to reduce translation strings used

* Sync translations with Crowdin

---------

Signed-off-by: Joshua Castle <26531652+Kas-tle@users.noreply.github.com>
Signed-off-by: GitHub <noreply@github.com>
Co-authored-by: Yara Durand <87721861+Roolps@users.noreply.github.com>
Co-authored-by: chris <github@onechris.mozmail.com>
Co-authored-by: Tydium <67938521+Tydium@users.noreply.github.com>
Co-authored-by: Creeperz653 <76449952+Creeperz653@users.noreply.github.com>
Co-authored-by: LetsGoAway <68365423+letsgoawaydev@users.noreply.github.com>
Co-authored-by: Luke <32024335+lukeeey@users.noreply.github.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Dan <20766261+D4n2021@users.noreply.github.com>
Co-authored-by: santevemox <57247088+santevemox@users.noreply.github.com>
Co-authored-by: rtm516 <ryantmilner@hotmail.co.uk>
Co-authored-by: Emma Alexia <wafflecoffee7@gmail.com>
Co-authored-by: Alex <zomka@fard.ing>
Co-authored-by: Aurorawr <100384210+Novampr@users.noreply.github.com>
Co-authored-by: Jens Collaert <63231928+Jens-Co@users.noreply.github.com>
Co-authored-by: OrionNodes <ethan@orionnodes.com>
Co-authored-by: SylentHuntress <91935048+sylenthuntress@users.noreply.github.com>
Co-authored-by: oryxel <gamingnoob681@gmail.com>
Co-authored-by: Eclipse <eclipse@eclipseisoffline.xyz>
Co-authored-by: Nebojsa Majic <79749977+Onako2@users.noreply.github.com>
Co-authored-by: qscbm187531 <1309635304@qq.com>
Co-authored-by: Eveline Carter <6444703+drakon64@users.noreply.github.com>
Co-authored-by: SleepyPop <81194303+SleepyPopp@users.noreply.github.com>
Co-authored-by: Aurorawr <auroranova8756@gmail.com>
Co-authored-by: rtm516 <rtm516@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 19:42:47 -07:00

10 KiB

title, description, crowdin_page_id
title description crowdin_page_id
Rainbow A tool to convert custom content to Bedrock. 36ba71a2-79ae-41ba-aba7-3e95609afbec

Rainbow is a client-sided Minecraft mod to convert resource packs with custom content created for Java Edition to an equivalent resource pack for Bedrock Edition, together with custom mappings to be used in Geyser. Rainbow is available for the Fabric modloader.

Rainbow can be downloaded at our website, or over at Modrinth.

:::info Rainbow is a mod installed on the Java client! As such, you need to be able to use a Java client to use Rainbow. Rainbow can be used with every resource pack, regardless of your server's software (it may be used with Spigot or Paper servers, for example). :::

:::warning Rainbow is used to convert resource packs adding new, custom content. For resource packs modifying vanilla content, you should look into using Thunder. :::

:::caution This project is in early development! Any bugs and issues should be reported at its issue tracker. :::

You can use Rainbow to convert custom content of datapacks (that require a resource pack), custom content plugins like Nexo or ItemsAdder, or even server-side only Fabric/NeoForge mods, such as Polymer mods. However, these custom content providers may use item displays, which Geyser does not yet support. This may result in your custom blocks or items not rendering on Bedrock when placed in the world.

You can use extensions created by the community, such as GeyserDisplayEntity, to add support for item displays to Geyser. However, keep in mind that these are not created by or affiliated with Geyser, and as such any issues that may occur should not be reported to us.

Usage

Rainbow works by analysing the loaded resource packs on the client and extracting the custom content found. As such, you need to ensure all the necessary resource packs for your custom content are loaded on your client. If custom content appears correctly on your Java client, then Rainbow is able to analyse it.

Generally, you use Rainbow as follows:

  1. Set up a Java Edition 26.2 client, with Fabric installed, and ensure that Rainbow is present on your client.
  2. Join a world or server of choice and make sure all the necessary resource packs are loaded. Then, run /rainbow create <pack name>, with <pack name> replaced with the name of your resource pack on Bedrock Edition.
  3. You can then start converting (or "mapping") custom content to be exported in your Bedrock resource pack. You can find a full list of ways to map custom content below.
  4. Run /rainbow finish to finish your conversion. Rainbow will then output the generated resource pack and additional files to .minecraft/rainbow/<pack name>. You can click the Wrote pack to disk message in chat to open that folder.
  5. In this folder, you'll find 4 important files/folders:
    • custom_mappings: you need to put the files in here in the custom_mappings folder in Geyser's config folder. These are the generated Geyser mappings.
    • pack.zip: this is the generated resource pack for Bedrock Edition. You need to put this file in the packs folder in Geyser's config folder.
    • lang: you need to put all files in this folder in the locales/overrides folder in Geyser's config folder.
      • The folder can be empty or non-existent if no language files were found. This is usually not an issue!
    • report.txt: you don't need to do anything with this file, but it contains information about generated assets and possible problems that occurred. It can be useful to diagnose potential issues with Rainbow, and you should upload it when filing a bug report.
  6. Once you've taken all the necessary steps and uploaded the generated content to your Geyser server, restart your server. If everything went well, Bedrock users should now see your custom content!

Mapping custom blocks

Rainbow is able to map custom blocks that are created by overriding unused vanilla block states. Most blocks can automatically be mapped by running /rainbow auto blocks, which will scan through all loaded resource packs for custom blocks created using block state overrides, and mapping all that are found.

:::warning Running /rainbow auto blocks may shortly freeze your client. :::

With some resource packs, Rainbow may not be able to automatically detect all custom blocks. In this case, you may have to map blocks manually, which you can do by using /rainbow map block <target>, where <target> is a position in the world, at which a custom block is placed.

Mapping custom items and skulls

Rainbow supports mapping custom items, by detecting items with custom minecraft:item_model or minecraft:custom_model_data components. Rainbow is also able to map custom skulls. Each method of mapping custom items is described below.

Mapping manually

You can map custom items manually by running /rainbow map item. This will map the custom item or skull you're currently holding in your hand in-game, if any. You can also run /rainbow mapinventory, which will scan your entire inventory for any custom items or skulls, and maps all that are found.

:::info Rainbow is automatically able to find most kinds of custom items when using mapinventory, however, items created by overriding a vanilla item model definition may not be automatically detected, so you'll have to map these explicitly. :::

Mapping inventory menus automatically

Custom item plugins, like Nexo or ItemsAdder, commonly include an inventory menu listing all custom items. Rainbow can make use of this and automatically map all items listed in such an inventory menu, by running /rainbow auto inventory. This will scan all inventory menus and containers you open for custom items or skulls, and maps all that are found. You can also use this with chests that are filled with custom items, for example.

Run /rainbow auto stop to stop the mapping of custom items.

:::info Like with mapinventory, items created by overriding a vanilla item model definition may not be automatically detected, so you'll have to map these explicitly. :::

Mapping custom items from recipe outputs automatically

Rainbow is able to search through all known recipes for outputs that are custom items or skulls, and map any that are found, by running /rainbow auto recipes. This can be useful when mapping datapacks that add large amounts of custom items with custom recipes, for example.

:::info You can use the vanilla /recipe give @s * command to give yourself all recipes, which helps Rainbow recognise custom items when using this way of mapping items. :::

:::info As with mapinventory and auto inventory, items created by overriding a vanilla item model definition may not be automatically detected, so you'll have to map these explicitly. :::

Mapping custom sounds

Custom sounds may be mapped by using /rainbow auto sounds, which scans through all loaded resource packs for custom sounds, and maps all that are found. You may also use /rainbow map sound <namespace>, which maps all the custom sounds of the given namespace. This can be useful when you only want to export custom sounds of a single resource pack.

Mapping custom waypoint styles

Custom waypoint styles, also known as locator bar icons, may be mapped by using /rainbow auto waypoints, which scans through all loaded resource packs for custom styles, and maps all that are found. You may also use /rainbow map waypoint <waypoint style>, which maps a single waypoint style.

Capabilities and limitations

Rainbow is currently capable of the following:

  • Generating Geyser block mappings for custom blocks made using block state overrides, both automatically and manually from loaded resource packs.
  • Generating Geyser item mappings complete with data components and proper bedrock options, by detecting items with custom minecraft:item_model or minecraft:custom_model_data components, and analysing their components.
    • Also includes generating mappings with predicates for more complicated Java item model definitions, such as checks for if an item is broken. The following definition types are currently supported by Rainbow:
      • Plain item model definitions.
      • Conditional item models, supported properties are:
        • broken,
        • damaged,
        • custom_model_data,
        • has_component, and,
        • fishing_rod/cast.
      • Range dispatch item models, supported properties are:
        • bundle/fullness,
        • count,
        • custom_model_data, and,
        • damage.
      • Select item models, supported properties are:
        • charge_type,
        • trim_material,
        • context_dimension, and,
        • custom_model_data.
        • For the display_context property, the gui case is mapped, if present.
    • Also includes detecting if an item should be displayed handheld by looking at the item's model.
    • Also is able to detect and map items using the "legacy" custom_model_data range-dispatch style, and map them to Geyser's legacy item mappings.
  • Generating Geyser skull mappings.
  • Generating Geyser waypoint style mappings for custom waypoint styles (locator bar icons).
  • Generating a simple Bedrock resource pack for blocks and simple 2D items, as well as:
    • Simple custom armour items, by analysing an item's minecraft:equippable component and loaded equipment assets.
      • Custom elytra items also work, but only visually, due to bedrock limitations.
    • 3D items, by converting the Java model to a bedrock one, and generating an attachable and animations for it, as well as rendering a custom GUI icon.
      • Is able to translate display transformations for the head, first-person and third-person item slots.
    • Custom sounds.
  • Generating working animated (flipbook) textures for 2D items and 3D items that make use of a single texture only.
  • Exporting merged language files from loaded resource packs to a folder, for easy copying to Geyser's locales/overrides folder.
    • Files from different resource packs for the same language are merged together.

Contributing

Any contributions are appreciated. Please feel free to reach out to us on Discord if you're interested in helping out with Rainbow.