Address reviews

docusaurus.config.ts

@@ -248,11 +248,7 @@ const config: Config = {
                         },
                         {
                             label: 'Global Linking',
-                            href: 'https://link.geysermc.org/',
-                        },
-                        {
-                            label: 'Privacy Policy',
-                            href: 'https://ziax.com/terms/privacy-policy/',
+                            to: 'https://link.geysermc.org/',
                         },
                     ],
                 },

i18n/en/code.json

@@ -215,7 +215,7 @@
   "providers.provider.nicraft.description": {
     "message": "Does not provide Bedrock support, and are affected by a [firewall configuration issue](https://wiki.geysermc.org/geyser/port-forwarding/#ovh-and-soyoustart), which prohibits most players from joining."
   },
-  "providers.provider.dawn.description": {
+  "providers.provider.feather.description": {
     "message": "Their proxy network does not support UDP. Therefore, Geyser is not supported. As an alternative, set up a paper server with e.g. playit.gg instead of port forwarding."
   },
   "providers.provider.freemcserver_net.description": {
@@ -784,7 +784,7 @@
     "description": "The unlisted content banner message"
   },
   "providers.provider.not_listed.description": {
-    "message": "If your hosting provider is not listed, try using [Warden Signalling](/wiki/geyser/nethernet/setup#warden-signalling). If this doesn't work, ask your hosting provider for a TCP and UDP port and use that. For VPS/KVM servers please follow the self-hosting steps."
+    "message": "If your hosting provider is not listed, try enabling the `clone-remote-port` option in the config. Then, restart the server, and try connecting with the same IP and port as on Java Edition. <br> If this does not work, ask your server hosting provider for a UDP port, and use that. For VPS/KVM servers please follow the self-hosting steps."
   },
   "providers.provider.wasabihosting.description": {
     "message": "Install Geyser with the plugin installer. Use the same port as your Java server in the Geyser config. Connect with the same address and port as your Java server."
@@ -868,11 +868,5 @@
   },
   "pages.dumpviewer.extensions.helptext": {
     "message": "Click on an extension to view more information."
-  },
-  "providers.provider.consulhosting.description": {
-    "message": "GeyserMC can be installed with a single click on ConsulHosting's Minecraft server hosting. Head to your server panel, find the GeyserMC option at Software, and install it automatically — no manual configuration needed. For step-by-step instructions, see [ConsulHosting's GeyserMC installation tutorial](https://consulhosting.com/help/install-geysermc/)."
-  },
-  "pages.download.description.floodgatedatabases": {
-    "message": "Database extension jars for Floodgate local linking."
   }
 }

i18n/en/docusaurus-plugin-content-docs/current.json

@@ -186,21 +186,5 @@
   "sidebar.geyserSidebar.category.Custom Resource Packs": {
     "message": "Custom Resource Packs",
     "description": "The label for category Custom Resource Packs in sidebar geyserSidebar"
-  },
-  "sidebar.geyserSidebar.category.Nethernet": {
-    "message": "Nethernet",
-    "description": "The label for category Nethernet in sidebar geyserSidebar"
-  },
-  "sidebar.geyserSidebar.category.Nethernet.link.generated-index.title": {
-    "message": "Nethernet",
-    "description": "The generated-index page title for category Nethernet in sidebar geyserSidebar"
-  },
-  "sidebar.geyserSidebar.category.Nethernet.link.generated-index.description": {
-    "message": "An explanation of Nethernet",
-    "description": "The generated-index page description for category Nethernet in sidebar geyserSidebar"
-  },
-  "sidebar.geyserSidebar.category.Custom Content": {
-    "message": "Custom Content",
-    "description": "The label for category Custom Content in sidebar geyserSidebar"
   }
 }

i18n/en/docusaurus-theme-classic/footer.json

@@ -63,10 +63,6 @@
     "message": "Global Linking",
     "description": "The label of footer link with label=Global Linking linking to https://link.geysermc.org/"
   },
-  "link.item.label.Privacy Policy": {
-    "message": "Privacy Policy",
-    "description": "The label of footer link with label=Privacy Policy linking to https://ziax.com/terms/privacy-policy/"
-  },
   "logo.alt": {
     "message": "GeyserMC logo",
     "description": "The alt text of footer logo"

sidebars.ts

@@ -54,19 +54,6 @@ const sidebars: SidebarsConfig = {
                 'geyser/port-forwarding'
             ]
         },
-        {
-            type: 'category',
-            label: 'Nethernet',
-            link: {
-                type: "generated-index",
-                title: "Nethernet",
-                description: "An explanation of Nethernet",
-                slug: "/geyser/nethernet",
-            },
-            items: [
-                'geyser/nethernet/setup'
-            ],
-        },
         {
             type: 'category',
             label: 'Common Issues',

src/components/Provider.tsx

@@ -52,7 +52,7 @@ export const ProviderSelector = () => {
         name: 'Not listed',
         description: translate({
             id: 'providers.provider.not_listed.description',
-            message: "If your hosting provider is not listed, try using [Warden Signalling](/wiki/geyser/nethernet/setup#warden-signalling). If this doesn't work, ask your hosting provider for a TCP and UDP port and use that. For VPS/KVM servers please follow the self-hosting steps.",
+            message: "If your hosting provider is not listed, try enabling the `clone-remote-port` option in the config. Then, restart the server, and try connecting with the same IP and port as on Java Edition. <br> If this does not work, ask your server hosting provider for a UDP port, and use that. For VPS/KVM servers please follow the self-hosting steps."
         })
     } as HostingProvider);
 

src/data/providers.ts

@@ -72,14 +72,6 @@ export const providersData: Providers = {
                 message: "Go to their [Crossplay Server](https://cloudnord.net/minecraftcrossplay-server-hosting/) hosting section and order your server. Instructions on how to join are provided."
             })
         },
-        {
-            name: 'ConsulHosting',
-            url: 'https://consulhosting.com/minecraft-server-hosting/',
-            description: translate({
-                id: 'providers.provider.consulhosting.description',
-                message: "GeyserMC can be installed with a single click on ConsulHosting's Minecraft server hosting. Head to your server panel, find the GeyserMC option at Software, and install it automatically — no manual configuration needed. For step-by-step instructions, see [ConsulHosting's GeyserMC installation tutorial](https://consulhosting.com/help/install-geysermc/)."
-            })
-        },
         {
             name: 'CreeperHost',
             url: 'https://www.creeperhost.net/',
@@ -213,6 +205,14 @@ export const providersData: Providers = {
                 message: "Order a [Minecraft server](https://serverprism.com/minecraft-server-hosting) on any plugin-compatible runtime (Paper, Spigot, Purpur, etc.), then install Geyser from the panel's plugin installer. Connect with the same IP and port as your Java server."
             })
         },
+        {
+            name: 'Snakecraft Hosting',
+            url: 'https://snakecrafthosting.com/',
+            description: translate({
+                id: 'providers.provider.snakecraft_hosting.description',
+                message: "Select 'Paper + Geyser with Floodgate' under the Jar Type at checkout to install the Geyser plugin. Players will Connect with the same IP and port as you would on Java."
+            })
+        },
         {
             name: 'SRKHOST',
             url: 'https://www.srkhost.eu/',
@@ -237,6 +237,14 @@ export const providersData: Providers = {
                 message: "Full automatic installation. Go to one of the panel options and select the option to enable GeyserMC. Then, restart and connect to your server using your Java IP and port."
             })
         },
+        {
+            name: 'Virtual Gladiators',
+            url: 'https://virtualgladiators.com/',
+            description: translate({
+                id: 'providers.provider.virtual_gladiators.description',
+                message: "Find the plugin in the control panel under the 'VG Recommended' category and restart your server. IP and port are the same as Java."
+            })
+        },
         {
             name: 'WiseHosting',
             url: 'https://wisehosting.com',
@@ -253,6 +261,14 @@ export const providersData: Providers = {
                 message: "Find the plugin in the control panel and restart your server. IP and port are the same as Java."
             })
         },
+        {
+            name: '365Hosts',
+            url: 'https://365hosts.com',
+            description: translate({
+                id: 'providers.provider.365hosts.description',
+                message: "Go to their [Minecraft: Crossplay](https://www.365hosts.com/gaming/crossplayminecraft) hosting section and order your server. Instructions on how to join are provided."
+            })
+        }
     ],
     support: [
         {
@@ -297,6 +313,11 @@ export const providersData: Providers = {
             url: 'https://clovux.net/',
             description: descriptionTemplates.javaIp
         },
+        {
+            name: 'Consulhosting',
+            url: 'https://consulhosting.nl/',
+            description: descriptionTemplates.default
+        },
         {
             name: 'Craft-Hosting',
             url: 'https://craft-hosting.ru/',
@@ -373,11 +394,24 @@ export const providersData: Providers = {
             url: 'https://freakhosting.com/',
             description: descriptionTemplates.default
         },
+        {
+            name: 'Fusion Hosting',
+            url: 'https://fusionhostingltd.co.uk',
+            description: translate({
+                id: 'providers.provider.fusion_hosting.description',
+                message: "Get Geyser as a plugin. Use the same port as your Java server for the Bedrock port in your config (either by setting it yourself, or enabling “clone-remote-port”) and connect with the same IP and port as you would on Java or create a port in the Network tab on the panel & use this for Geyser."
+            })
+        },
         {
             name: 'GameHosting.it',
             url: 'https://www.gamehosting.it/',
             description: descriptionTemplates.default
         },
+        {
+            name: 'GameProHost',
+            url: 'https://gameprohost.com/',
+            description: descriptionTemplates.default
+        },
         {
             name: 'GPortal',
             url: 'https://www.g-portal.com/',
@@ -386,6 +420,14 @@ export const providersData: Providers = {
                 message: "You have to adjust the port according to your query port. Scheme: Query port: xxx65. The ports from xxx66 to xxx70 are available. For example, if your query port is 12365, then Geyser can only run under the port range 12366-12370. Furthermore, you have to change the 'Bedrock' 'address' in the Geyser config to your IP address. You can find it above your query port. Don't forget to delete the # in front of `address'."
             })
         },
+        {
+            name: 'Heavynode',
+            url: 'https://www.heavynode.com/',
+            description: translate({
+                id: 'providers.provider.heavynode.description',
+                message: "Open a port yourself in the networking section of the control panel. Port `19132` is only available with a dedicated IP (contact support), otherwise you will need to use a randomly assigned port. To resolve further connection issues for servers located in Canada and the UK, contact their support with the info found [here](https://wiki.geysermc.org/geyser/port-forwarding/#ovh-and-soyoustart)."
+            })
+        },
         {
             name: 'Hicoria',
             url: 'https://hicoria.com/en/',
@@ -452,6 +494,14 @@ export const providersData: Providers = {
             url: 'https://mc-host24.de/',
             description: descriptionTemplates.ipAndPort
         },
+        {
+            name: 'MCFORFREE.DE',
+            url: 'https://mcforfree.de/',
+            description: translate({
+                id: 'providers.provider.mcforfree.de.description',
+                message: 'Create an extra port in the game panel, then change the `port` in the `bedrock` section to the newly created port. To connect on Bedrock edition, use the Java server\'s IP and the port you\'ve created. It may take a few minutes for the port to become active.'
+            })
+        },
         {
             name: 'MCPEhost.ru',
             url: 'https://mcpehost.ru',
@@ -486,6 +536,14 @@ export const providersData: Providers = {
                 message: "Check [Modrinth's documentation](https://support.modrinth.com/en/articles/10986613-adding-geyser-to-your-server) for specific instructions."
             })
         },
+        {
+            name: 'Netbela',
+            url: 'https://netbela.nl/store/minecraft',
+            description: translate({
+                id: 'providers.provider.netbela.description',
+                message: "Install Geyser with the dedicated Plugin installer. Use the same port as your Java server in your config. Connect with the same address and port as your Java server."
+            })
+        },
         {
             name: 'NFOservers',
             url: 'https://nfoservers.com/',
@@ -518,6 +576,14 @@ export const providersData: Providers = {
                 message: "Check [NolimitHost's documentation](https://nolimithost.cc/docs/minecraft/geyser) for specific instructions."
             })
         },
+        {
+            name: 'OrionNodes',
+            url: 'https://orionnodes.com',
+            description: translate({
+                id: 'providers.provider.orionnodes.description',
+                message: "Open a port yourself from the network page in the game panel, use that port in the bedrock section of the Geyser config."
+            })
+        },
         {
             name: 'PaperNodes',
             url: 'https://papernodes.com/',
@@ -548,8 +614,8 @@ export const providersData: Providers = {
             })
         },
         {
-            name: 'RackGenius',
-            url: 'https://rackgenius.com/',
+            name: 'RamShard',
+            url: 'https://ramshard.com/',
             description: descriptionTemplates.default
         },
         {
@@ -607,6 +673,14 @@ export const providersData: Providers = {
                 message: "Set the Bedrock port to the Java server's port and connect with that port; note that this provider only provides service in Australia."
             })
         },
+        {
+            name: 'SyntexHosting',
+            url: 'https://syntexhosting.com/',
+            description: translate({
+                id: 'providers.provider.syntexhosting.description',
+                message: "Set the Bedrock port to the Java server's port and connect with that port, or request a (free) additional port."
+            })
+        },
         {
             name: 'The Minecraft Hosting',
             url: 'https://theminecrafthosting.com/',
@@ -620,11 +694,26 @@ export const providersData: Providers = {
             url: 'https://tnahosting.net/',
             description: descriptionTemplates.default
         },
+        {
+            name: 'TurboHost',
+            url: 'https://turbohost.nl/',
+            description: descriptionTemplates.default
+        },
+        {
+            name: 'UltimateSRV',
+            url: 'https://ultimatesrv.com/',
+            description: descriptionTemplates.default
+        },
         {
             name: 'VexyHost',
             url: 'https://vexyhost.com/',
             description: descriptionTemplates.default
         },
+        {
+            name: 'Volcano Hosting',
+            url: 'https://www.volcanohosting.net/',
+            description: descriptionTemplates.default
+        },
         {
             name: 'VoltHosting',
             url: 'https://www.volthosting.co.uk/',
@@ -692,10 +781,10 @@ export const providersData: Providers = {
             })
         },
         {
-            name: 'Dawn',
-            url: 'https://dawn.gg/',
+            name: 'Feather',
+            url: 'https://feathermc.com/',
             description: translate({
-                id: 'providers.provider.dawn.description',
+                id: 'providers.provider.feather.description',
                 message: "Their proxy network does not support UDP. Therefore, Geyser is not supported. As an alternative, set up a paper server with e.g. playit.gg instead of port forwarding."
             })
         }

src/data/versions.json

@@ -1,9 +1,9 @@
 {
     "bedrock": {
-        "supported": "26.0-26.45",
+        "supported": "26.0-26.40",
         "latest": {
-            "id": 2169,
-            "name": "26.45"
+            "id": 2168,
+            "name": "26.40"
         }
     },
     "java": {

wiki/geyser/getting-started-with-the-api.md

@@ -32,7 +32,7 @@ Add Geyser's API codebase as a dependency:
 <dependency>
     <groupId>org.geysermc.geyser</groupId>
     <artifactId>api</artifactId>
-    <version>2.11.2-SNAPSHOT</version>
+    <version>2.10.0-SNAPSHOT</version>
     <scope>provided</scope>
 </dependency>
 ```
@@ -40,7 +40,7 @@ Add Geyser's API codebase as a dependency:
 **Gradle**
 ```groovy
 dependencies {
-    compileOnly('org.geysermc.geyser:api:2.11.2-SNAPSHOT')
+    compileOnly('org.geysermc.geyser:api:2.10.0-SNAPSHOT')
 }
 ```
 

wiki/geyser/nethernet/setup.md

@@ -1,73 +0,0 @@
----
-title: Nethernet Setup Guide
-description: A guide for setting Nethernet up with Geyser.
----
-
-Geyser now supports the new Nethernet mode of transport used by default on Bedrock as of build #1237, this is preferred over Raknet which will be removed in the upcoming 26.60 update (Date TBA).
-
-## Differences between Nethernet and Raknet
-
-The important different between Nethernet and Raknet is that Nethernet requires a TCP port **and** a UDP port, compared to Raknet that only needed a UDP port. This makes Nethernet more difficult to setup on certain hosting providers/networking setups.
-
-Nethernet will do the following with a bedrock server:
-- Contact the "Signalling" server found on the TCP port in order to get the following:
-  - The MOTD, player count and ping
-  - The connection details with bedrock will use to connect via UDP (WebRTC)
-- The client then connects to the server via WebRTC which is where the UDP port is required
-
-Raknet will do the following with a bedrock server:
-- Make a small connection to the server to get the MOTD, player count and ping
-- The client then connects to the server properly and starts sending the join data
-
-This small difference shakes up the entire networking involved when connecting to a server on Bedrock. For this reason, the migration to Nethernet may be difficult for some users; but, we're hoping with the preparation time we've been given, we can make the transition smoother.
-
-## What does this mean for you?
-
-Depending on how you host your server, this could mean different things. Generally, you need to redo your network configurations if you made any previously for your server.
-
-:::caution
-
-If you used `clone-remote-port` when setting up your Geyser server, it is important to note this option **no longer works**! You must either change the port used, or setup [Nethernet External Signalling](#nethernet-external-signalling), if you do not, the Nethernet TCP port will collide with the Java server's port and the Nethernet signalling server will fail to boot, making it impossible to connect to your server.
-
-:::
-
-### Self-hosting
-
-Ensure you have port forwarded your bedrock port for TCP also, this will allow Geyser to run the signalling server and continue accepting connections successfully. If you cannot do this for some reason, there is another option in order to get Nethernet working, see [Nethernet External Signalling](#nethernet-external-signalling).
-
-### Hosting provider
-
-When using a hosting provider, the fix is variable depending on which provider you're using, but we can help a bit here.
-
-If you manually setup your network for Geyser by assigning a UDP port, good news! There's a good chance Nethernet should just work, as many providers will also allocate a TCP port with it. However, if this is not the case, allocate your UDP port for TCP also.
-
-If you did not manage the networking, odds are you should be fine, as your hosting provider will hopefully be prepared for Nethernet, as we've given them the tools in order to get Nethernet setup.
-
-If you only needed to enable `clone-remote-port`, see the caution above, with describes why this option **no longer works**.
-
-If after this, none of those options worked, you may want to look into [Nethernet External Signalling](#nethernet-external-signalling).
-
-## Nethernet External Signalling
-
-Nethernet External Signalling (or NXS for short) is an open standard developed by [Open Collaboration](https://opencollaboration.dev/) alongside [Ziax](https://ziax.com/)! This standard allows you to run the Nethernet signalling server (the TCP port part) away from your server, then have them connect to each other!
-
-This is good because:
-- The signalling server can handle multiple servers at once, under a single port, making the networking setup more simple
-- Any external provider can be used, not just your own, for example, [Warden](#warden-signalling)
-- A hosting provider can automatically setup a signalling server and tell Geyser to use it, making setup much simpler!
-
-### Warden Signalling
-
-Warden Signalling, or just Warden, is a free service offered by [Ziax](https://ziax.com/) which Geyser can connect to in order to be given an IP which can be used to connect to your server!
-
-What this means:
-- You do not need to forward a TCP port
-- You will not have a custom IP address, but something like `turquoisemango.wdn.gg` instead
-- You **still** need to forward a UDP port for Warden to connect to, otherwise Warden will send the client to an unconnectable address
-- You do not need any other signalling server, Warden is plug and play with Geyser
-
-:::info
-
-Warden is designed for smaller servers, if you own a big server, it is strongly advised you use your own signalling server or use Geyser's built in one.
-
-:::

wiki/geyser/setup/self/modded-servers.mdx

@@ -34,9 +34,7 @@ Geyser only works with **server-side** mods. Mods that require a client-side ins
       clone-remote-port: false
     ```
    The vital part is the port. This is the port that Bedrock players will use to connect to your server!
-   If you enable `clone-remote-port`, the port will be overridden and the Java port is used, but be careful,
-   as this only works when using [Nethernet External Signalling](/wiki/geyser/nethernet/setup#nethernet-external-signalling)
-   as the Nethernet TCP port cannot collide with the Java one.
+   If you enable `clone-remote-port`, the port will be overridden and the Java port is used.
    Since you are self-hosting, you can choose the port freely - the default port is 19132.   
    **Important**: Other services/mods that rely on ports with UDP, such as Voice Chats or Query, cannot share the port with Geyser.
 

wiki/geyser/setup/self/paper-spigot.mdx

@@ -29,9 +29,7 @@ See also [this page](/wiki/geyser/supported-versions/) on supported versions.
       clone-remote-port: false
     ```
     The vital part is the port. This is the port that Bedrock players will use to connect to your server!
-    If you enable `clone-remote-port`, the port will be overridden and the Java port is used, but be careful,
-    as this only works when using [Nethernet External Signalling](/wiki/geyser/nethernet/setup#nethernet-external-signalling)
-    as the Nethernet TCP port cannot collide with the Java one.
+    If you enable `clone-remote-port`, the port will be overridden and the Java port is used.
     Since you are self-hosting, you can choose the port freely - the default port is 19132.   
     **Important**: Other services/plugins that rely on ports with UDP, such as Voice Chats or Query, cannot share the port with Geyser.
      

wiki/geyser/setup/self/proxy-servers.mdx

@@ -31,9 +31,7 @@ import { Versions } from '@site/src/components/Versions'
        clone-remote-port: false
     ```
     The vital part is the port. This is the port that Bedrock players will use to connect to your server!
-    If you enable `clone-remote-port`, the port will be overridden and the Java port is used, but be careful,
-    as this only works when using [Nethernet External Signalling](/wiki/geyser/nethernet/setup#nethernet-external-signalling)
-    as the Nethernet TCP port cannot collide with the Java one.
+    If you enable `clone-remote-port`, the port will be overridden and the Java port is used.
     Since you are self-hosting, you can choose the port freely - the default port is 19132.   
    **Important**: Other services/plugins that rely on ports with UDP, such as Voice Chats or Query, cannot share the port with Geyser.
      

wiki/geyser/setup/self/viaproxy.mdx

@@ -23,9 +23,7 @@ description: Learn how to set up Geyser with ViaProxy.
       clone-remote-port: false
     ```
     The vital part is the port. This is the port that Bedrock players will use to connect to your server!
-    If you enable `clone-remote-port`, the port will be overridden and the ViaProxy port is used, but be careful,
-    as this only works when using [Nethernet External Signalling](/wiki/geyser/nethernet/setup#nethernet-external-signalling)
-    as the Nethernet TCP port cannot collide with the Java one.
+    If you enable `clone-remote-port`, the port will be overridden and the ViaProxy port is used.
     Since you are self-hosting, you can choose the port freely - the default port is 19132.
 
     **Important**: Other services/plugins that rely on ports with UDP, such as Voice Chats or Query, cannot share the port with Geyser.

wiki/other/community-geyser-projects.md

@@ -130,16 +130,6 @@ This is a Spigot/BungeeCord/Velocity plugin that can be used to automatically up
 
 Creators: [Jens](https://github.com/Jens-Co), [YHDiamond](https://github.com/YHDiamond), [Konicai](https://github.com/Konicai)
 
-## Junction {#junction}
-A modern Geyser and Floodgate management solution for Paper, Purpur, and Folia servers. It automates Bedrock player management by executing platform-specific commands and handling LuckPerms or Vault group assignments.
-
-* [Modrinth](https://modrinth.com/plugin/junction)
-* [Hangar](https://hangar.papermc.io/Maboroshi/Junction)
-* [Documentation](https://docs.maboroshi.org/projects/junction)
-* [GitHub](https://github.com/MaboroshiKobo/Junction)
-
-Creator: [muhdfdeen](https://github.com/muhdfdeen)
-
 ## SleepingServerStarter {#sleepingserverstarter}
 Small application that waits for a player to connect before launching actual minecraft server.
 * [GitHub](https://github.com/vincss/mcsleepingserverstarter)